Build Your Own
Filter

Enter your filter specifications

Filter Measurements
Length: Measure from the back of the opening of your AC handler, to the front Width: From inner left to inner right of your AC handler opening
Height: From top to bottom of where the filter goes
Personal Information

Polyester Blue

These panel filters are rigidly constructed using a progressively dense fiberglass or Polystrand media to maximize dust holding capacity. The metal grids are thermally bonded to the internal sides of a heavy-duty one-piece craftboard frame. The Merv rating is 5 and suggest change within 30 to 90 days.

Dustlok Antimicrobial

Antimicrobial filters trap pet dander and germs that make you sick. If you live in an area that is highly exposed to dust where allergens thrive, you can expect this filter to trap those particles on a microbial level. This orange filter has a MERV rating of 9 and should be changed every 30 days.

Pleated

Electrostatically Charged Fibers Increase Initial Efficiency   *Low Pressure Drop *High Dust Holding Capacity   *Heavy-duty, Moisture Resistant Construction   *Thermally Bonded, 100% Synthetic Fibers   *Media Will Not Support Microbial Growth   *Ideal Upgrade From Regular Pleats, Poly Panels & Disposable Filters   *Excellent Pre-filter or Primary Filter MERV rating of 8 and should be changed every 30 to 90 days.

Aluminum Frame

This is a strong heavy duty riveted aluminum frame.  It is to be used with disposable polyester filter pads.  It is pictured with Orange/White media but you could use any media of your choice.